This is how we do what we do...
The making of a RAGGEDedge Wallet:
We use a rotary cutter (which is essentially a circular exacto blade) to cut strips of each material.
Our standard size wallets have 9 or 10 different pieces.
Each piece is edged with another piece of cloth and our signature triple step zig zag stitch.
Once edging is complete, the pieces of the wallet are layered together and stitched to form the card pockets/sleeves. For this step, we use clips to hold the wallet pieces in place before they get sewn.
At this point, it is time for assembly of all the layered and edged parts and pieces. More clips, more edging, and more triple step zig zag stitching.
After they are done being sewn they are given a final review.
Second to last step: the corners of the edging are trimmed and melted to prevent fraying and raveling.
Final step: each wallet is folded and smushed under weights in order to start the folds training and compress the crease, helping to make them extra thin.
The making of a RAGGEDedge Bag:
Step one, cut out all the parts and pieces.
Before the bags are assembled we stitch layers of material on top of each other to reinforce stress points like grab straps and handles.
Once that is complete, it is time for zippers, pockets and straps.
Next, up is actual construction. Our bags are built inside out so that the seams end up on the inside. Seams are stitched with a straight stitch and then reinforced with our signature triple step zig zag before being turned right side out.
We call the turning process “birthing.”
After birthing, the product is checked over and then finishing touches are added, such as line for zipper pulls.
As with all materials there is a learning curve, and these high tech cloths have an especially tricky one. We have been working with these flexible, but stiff, laminate cloths for almost 10 years. It took 8 of those years for us to develop the above method of design, reinforcement, and assembly that enables us to make the products we want to out of these materials.
Our designs and assembly process combine elements from a wide range of sewing disciplines. We have experience in quilting, patterning, upholstery, canvas work, and sail making; we utilize techniques from each and every one of them.
The making of a RAGGEDedge Wallet:
The making of a RAGGEDedge Bag:
As with all materials there is a learning curve, and these high tech cloths have an especially tricky one. We have been working with these flexible, but stiff, laminate cloths for almost 10 years. It took 8 of those years for us to develop the above method of design, reinforcement, and assembly that enables us to make the products we want to out of these materials.
Our designs and assembly process combine elements from a wide range of sewing disciplines. We have experience in quilting, patterning, upholstery, canvas work, and sail making; we utilize techniques from each and every one of them.
